Configuring IPTV on Enigma2 (Zgemma) Devices Using PuTTY

1- Introduction

With PuTTY, a free SSH/Telnet client for Windows, configuring IPTV UK on your Enigma2 (Zgemma) device is a straightforward task. This guide provides clear instructions for each step of the process.

2- Preparation Steps

2.1- Step 1: Installing PuTTY

First, download and install PuTTY from the official website:

1. Download PuTTY: Visit the PuTTY website and download the installation file.
2. Install PuTTY: Run the downloaded file and follow the installation instructions.

2.2- Step 2: Obtaining Device IP Address

You’ll need the IP address of your Enigma2 device, which can typically be found in the network settings menu of your device.

3- Configuration Process

3.1- Step 3: Setting Up PuTTY

• Launch the PuTTY application on your computer.
• In the “Host Name” field, enter your Enigma2 device’s IP address.
• In the “Connection type” section, select “Telnet“.
• Click the “Open” button to initiate the connection.

3.2- Step 4: Device Authentication

A black screen (terminal window) will appear:

1. Enter Root User: Type root and press Enter.
2. Enter Password: Type your device’s root password and press Enter.

3.3- Step 5: Running the IPTV Auto-installer Script

Once logged in, enter the IPTV auto-installer script. Note that the script provided here is just an example. Use the script provided by your IPTV service.

Copywget -O /etc/enigma2/iptv.sh "http://domainname.com:port/get.php?username=MyUser&password=MyPassword&type=enigma22_script&output=ts" && chmod 777 /etc/enigma2/iptv.sh && /etc/enigma2/iptv.sh

Replace http://domainname.com:port/get.php?username=MyUser&password=MyPassword&type=enigma22_script&output=ts with the actual M3U URL provided in your subscription details.

3.4- Step 6: Restarting Your Device

1. After the script has finished running, type reboot and press Enter.
2. Your Enigma2 device will restart. After the reboot, your IPTV configuration should be complete.

4- Enhancing Your IPTV Experience

4.1- Step 7: Adding EPG to Your IPTV Subscription

For an improved viewing experience, you may want to add an Electronic Program Guide (EPG) to your IPTV channels.

4.1.1- Downloading E-Channelizer

1. Download E-Channelizer: Visit the E-Channelizer download page and download the program.
2. Install E-Channelizer: Install the program on your Windows computer.

4.1.2- Assigning EPG References

1. Launch the program and connect it to your Enigma2 device.
2. Drag and drop the corresponding satellite channel onto the IPTV channel while holding down the Ctrl key. This assigns the correct EPG reference.
3. Write the changes back to your device. The interface will restart, and your EPG should be set.

With this configuration guide, you can easily enjoy high-quality IPTV on your Enigma2 device with a complete program guide.